AT-361MC2 Dual-Spindle Hard-Rail Master For Long-Shaft Machining

Machine tool technical parameter table:
Content		Units	AT-361MC2
Turret	Turret specifications	Model	TCSM
			Power turret
	Turret type/Number of tools	pcs	BMT65-12T
Travel	Maximum rotation diameter of the hod	mm	700
	Two centroid distance	mm
	ZProcessing length	mm	1100
	Maximum machining diameter	mm	380
	Bar processing diameter	mm	75(92)
System configuration	FANUC	OI-TF
	Power tools motor	KW	3.7
Spindle	Oil pressure	Inch	10(12)
	Nose end	Type	A2-8
	Through hole diameter	mm	92(106)
	Bearing type	Type	NN3026(3028)
	Bearing diameter	mm	130(140)
	Spindle motor	KW	11-15(guangyu)
	Spindle speed	rpm	3000(2500)
Secondary spindle	Oilpressure	Inch	6寸
	Nose end	Type	A2-5
	Through hole diameter	mm	45
	Spindle motor	KW	7.5--11
	Spindle speed	rpm	4500
X-axis	Travel	mm	230
	Speed	m/min	20
	Servo motor	Kw	3.0
	Screw	mm	R32/10
	Repeatability		0.003
Z-axis	Travel	mm	1100
	Speed	m/min	20
	Servo motor	Kw	3.0
	Screw	mm	R40/10
	Repeatability	mm	0.007
Y-axis	Travel	mm
	Speed	m/min	/
	Servo motor	Kw
	Screw	mm
	Repeatability	mm
B-axis	Travel	mm	1100
	Speed	m/min	15
	Servo motor	Kw	3
	Screw	mm	R40/10
	Repeatability	mm	±0.005
Tail seat	Control mode	Type
	Mandrel outer diameter	mm
	Morse taper	Type	/
X Track		Type	Hard track
Y Track		Type	Hard track
Z Track		Type
Water tank capacity		Liter	300
Mechanical size	Floor area	cm	355x177
	Mechanica weight	kg	6900
	Packing size	cm	400x230×228

• Dual Spindles: The main spindle, powered by an 11 - 15kW wide - range motor, rotates at up to 3000 (2500) rpm. The secondary spindle, with a 7.5 - 11kW motor, reaches 4500 rpm. This setup enables concurrent machining, significantly cutting production time.

• Turret: Equipped with a BMT55 - 12T power turret of TCSM model, it offers flexibility in tooling for various machining operations.

• Travel: The lathe can handle a maximum rotation diameter of 700mm. With a Z - axis processing length of 1100mm, it’s well - suited for long - shaft workpieces. The maximum machining diameter is 380mm, and bar processing diameters range from 75 to 92mm.

• Axes: The X - axis travels 230mm with a speed of 20m/min and repeatability of 0.003mm. The Z - axis, with a travel of 1100mm at 20m/min, has a repeatability of 0.007mm. The B - axis travels 1100mm at 15m/min with a repeatability of ±0.005mm.

• Spindle: High - quality bearings ensure smooth and accurate spindle operation.

• System: Adopts the reliable FANUC 0I - TF system.

• Tracks: Hard rails on X, Z, and likely other relevant axes enhance stability and load - bearing capacity during machining.

• Manufacture engine shafts, transmission components, and axles with high precision and efficiency.

• Produce parts like turbine shafts and landing - gear components that require tight tolerances.

• Create long - shaft components for power generation equipment, such as wind turbines and generators.

Product Tags:

Long Shaft Machining cnc lathe mill

      

Dual Spindle cnc lathe mill

      

Dual Spindle cnc lathe milling machine

      

Long Shaft Machining CNC Lathe Mill Dual Spindle Hard Rail Master Images